possible to use an amp on the Br?

[Guitar-Maniac]

is it even possible? and where do i plug it in?
not very good at these kinda stuff.

-Cheers!

[AlchemyMN]

is it even possible? and where do i plug it in?
not very good at these kinda stuff.

Buy a stereo mini to 1/4" mono cable and you are good to go.  Plug the cable into the headphone/line out jack on the M-BR. You can also run stereo-mini to RCA or other plugs depending on what you are going into...

Easy to run the line out to hear the recording through speakers instead of headphone.  And also for using the unit as a guitar processor.

[Guitar-Maniac]

sorry, i dont really understand.
do i plug the stereo mini into the 'amp input' and the Headphone/line of the mbr?

thanks.

[Tony]

Standard guitar cable from your guitar into the MBR guitar input.
Stereo mini jack from the phones/line out output.
Standard 1/4" jack (from stereo mini to 1/4" mono cable) into amp guitar input. 
It's all good.

[Guitar-Maniac]

one more question!
if i was gonna use a guitar pedal, do i just plug it into the 'guitar in' with my guitar? would that work?

- thanks for the help!

[tkofaith]

one more question!
if i was gonna use a guitar pedal, do i just plug it into the 'guitar in' with my guitar? would that work?

- thanks for the help!

Yep, that'd do it!

[AlchemyMN]

one more question!
if i was gonna use a guitar pedal, do i just plug it into the 'guitar in' with my guitar? would that work?

- thanks for the help!

Double check the M-BR sensitivity before plugging in a high gain pedal - start the pedal gain low and bring it up, then adjust the sensitivity down if you want to bring the pedal gain further up...