Hi, i am a new user and i have been trying to bounce the 4 tracks down without losing the panning i have set for the tracks.
Is this possible?
Thanks for any help!!
Hi Nathan.
Yes it is possible. You need to bounce to a new pair of tracks, so if you have recorded onto Tr1V1, Tr2V1, Tr3V1 and Tr4V4, I'd suggest that you bounce to Tr12V8. This way you know that the top end of the Vtracks are for bounces and the lower end are for takes (individual instrument/voice recordings).
When you bounce, select the Bounce Mode by pushing Exit and Utility simultaneously until Bounce is shown in the display, use the right cursor key and the +/- keys to select the track and Vtrack you need.
Get you panning right (and levels and reverb etc.) and rehearse the bounce, then skip to the start of the track and record your bounce.
The tracks that you have selected to bounce to will be linked as a stereo pair and your sound stage should be as you recorded it.
Mastering is done in a similar way.
Good luck and welcome to the board.
Post your work!
Thanks for that. I will give that a go.
Cheers